WT4G1
WT4E1
Model for a Wind Generator with a Back-to-back Interface Converter (Type 4)
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
| WT4G1
|
Wind Generator Model with Power Converter (Type 4) |
| WT4E1
|
Electrical Control for Type 4 Wind Generator |
OpenIPSL.Electrical.Wind.PSSE.WT4G.WT4G1Wind Generator Model with Power Converter (Type 4)
Extends from Icons.VerifiedModel (Icon for classes that were verified), OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| M_b | Machine base power [VA] |
| T_IQCmd | Converter time constant for I_Qcmd [s] |
| T_IPCmd | Converter time constant for I_Pcmd [s] |
| V_LVPL1 | LVPL voltage 1 (Low voltage power logic) [1] |
| V_LVPL2 | LVPL voltage 2 [1] |
| G_LVPL | LVPL gain |
| V_HVRCR | HVRCR voltage (High voltage reactive current limiter) [1] |
| CUR_HVRCR | HVRCR current (Max. reactive current at VHVRCR) [1] |
| RIp_LVPL | Rate of LVACR active current change [1] |
| T_LVPL | Voltage sensor for LVACR time constant [s] |
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| p | |
| Iy | |
| V | |
| P | |
| Q | |
| IyL | |
| IxL | |
| I_qcmd | |
| I_pcmd | |
| I_qcmd0 | |
| I_pcmd0 |
OpenIPSL.Electrical.Wind.PSSE.WT4G.WT4E1Electrical Control for Type 4 Wind Generator
| Name | Description |
|---|---|
| PFAFLG | PF fast control |
| VARFLG | |
| PQFLAG | P/Q priority flag |
| Tfv | Filter time constant in voltage regulator [s] |
| Kpv | Proportional gain in voltage regulator [1] |
| KIV | Integrator gain in voltage regulator [1/s] |
| Kpp | Proportional gain in torque regulator [1] |
| KIP | Integrator gain in torque regulator [1] |
| Kf | Rate feedback gain [1] |
| Tf | Rate feedback time constant [s] |
| QMX | Max limit in voltage regulator [1] |
| QMN | Min limit in voltage regulator [1] |
| IPMAX | Max active current limit [1] |
| TRV | Voltage sensor time constant [s] |
| dPMX | Max limit in power PI controller [1] |
| dPMN | Min limit in power PI controller [1] |
| T_Power | Power filter time constant [s] |
| KQI | MVAR/Voltage gain [1] |
| VMINCL | Min voltage limit [1] |
| VMAXCL | Max voltage limit [1] |
| KVI | Voltage/Mvar gain [1] |
| Tv | Lag time constant in WindVar controller [s] |
| Tp | Pelec filter in fast PF controller [s] |
| ImaxTD | Converter current limit [1] |
| Iphl | Hard active current limit [1] |
| Iqhl | Hard reactive current limit [1] |
| PSSEMATCH |
| Name | Description |
|---|---|
| P | |
| Q | |
| V | |
| WIPCMD | |
| WIQCMD |