Gen1
Gen2
Gen3
Set of generation unit models used in IEEE (WSCC) 9-bus system
This package contains three generation unit models, composed of machine and exciter models, that are used in the IEEE (WSCC) 9-bus system. These models are:
The generation units also allow for a disturbance in the excitation system reference to be introduced.
| Name | Description |
|---|---|
| Gen1
|
18kV/100MVA generation unit connected to bus 2 |
| Gen2
|
13.8kV/100MVA generation unit connected to bus 3 |
| Gen3
|
16.5kV/100MVA generation unit connected to bus 1 |
OpenIPSL.Examples.IEEE9.Generation_Groups.Gen118kV/100MVA generation unit connected to bus 2
18kV/100MVA Generation unit, identified as number 1, connected to bus 2, and composed of the following component models:
Note that the model allows for a disturbance to be introduced in the voltage reference value for the excitation system.
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| vf0 | |
| vref0 | |
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| AVR Disturbance | |
| height_1 | |
| tstart_1 | |
| refdisturb_1 | |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.IEEE9.Generation_Groups.Gen213.8kV/100MVA generation unit connected to bus 3
13.8kV/100MVA Generation unit, identified as number 2, connected to bus 3, and composed of the following component models:
Note that the model allows for a disturbance to be introduced in the voltage reference value for the excitation system.
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| vf0 | |
| vref0 | |
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| AVR Disturbance | |
| height_2 | |
| tstart_2 | |
| refdisturb_2 | |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.IEEE9.Generation_Groups.Gen316.5kV/100MVA generation unit connected to bus 1
16.5kV/100MVA Generation unit, identified as number 3, connected to bus 1, and composed of the following component models:
Note that the model allows for a disturbance to be introduced in the voltage reference value for the excitation system.
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| vf0 | |
| vref0 | |
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| AVR Disturbance | |
| height_3 | |
| tstart_3 | |
| refdisturb_3 | |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |