G1
G2
G3
G4
Set of generation units modeled with PSSE composed only of machines
This package contains four generation unit models composed solely of PSSE machine models, that are used in the Two_Areas_PSSE system.
| Name | Description |
|---|---|
| G1
|
900MVA generation unit, composed only of a machine model, connected to bus 1 |
| G2
|
900MVA generation unit, composed only of a machine model, connected to bus 2 |
| G3
|
900MVA generation unit, composed only of a machine model, connected to bus 3 |
| G4
|
900MVA generation unit, composed only of a machine model, connected to bus 4 |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.No_Controls.G1900MVA generation unit, composed only of a machine model, connected to bus 1
900MVA generation unit connected to bus 1, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.No_Controls.G2900MVA generation unit, composed only of a machine model, connected to bus 2
900MVA generation unit connected to bus 2, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.No_Controls.G3900MVA generation unit, composed only of a machine model, connected to bus 3
900MVA generation unit connected to bus 3, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.No_Controls.G4900MVA generation unit, composed only of a machine model, connected to bus 4
900MVA generation unit connected to bus 4, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |