baseLoad
Base load models from PSSE
Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).
| Name | Description |
|---|---|
| baseLoad
|
Base load for PSSE models |
OpenIPSL.Electrical.Loads.PSSE.BaseClasses.baseLoadBase load for PSSE models
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| S_p | Consumption of original constant power load |
| S_i | Consumption of original constant current load |
| S_y | Consumption of original constant shunt admittance load |
| a | Load transfer fraction for constant current load |
| b | Load transfer fraction for constant shunt admittance load |
| PQBRAK | Constant power characteristic threshold [1] |
| characteristic | |
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| p |