Generator
GenEventTest
Group of generator models for SMIB system simulations with and without events
| Name | Description |
|---|---|
| Generator
|
Generator model composed by PSAT components |
| GenEventTest
|
Configuration of synchronous generator with regulators: GENSAL, HYGOV, SCRX, STAB2A |
OpenIPSL.Examples.DAEMode.SMIB_Examples.Example_1.Generator.GeneratorGenerator model composed by PSAT components
Extends from OpenIPSL.Interfaces.Generator (Interface for a generator which provides the PwPin).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.DAEMode.SMIB_Examples.Example_1.Generator.GenEventTestConfiguration of synchronous generator with regulators: GENSAL, HYGOV, SCRX, STAB2A
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| p |