OpenIPSL.Examples.IEEE9.Generation_Groups

Set of generation unit models used in IEEE (WSCC) 9-bus system

Information

This package contains three generation unit models, composed of machine and exciter models, that are used in the IEEE (WSCC) 9-bus system. These models are:

The generation units also allow for a disturbance in the excitation system reference to be introduced.

Package Content

Name Description
OpenIPSL.Examples.IEEE9.Generation_Groups.Gen1 Gen1 18kV/100MVA generation unit connected to bus 2
OpenIPSL.Examples.IEEE9.Generation_Groups.Gen2 Gen2 13.8kV/100MVA generation unit connected to bus 3
OpenIPSL.Examples.IEEE9.Generation_Groups.Gen3 Gen3 16.5kV/100MVA generation unit connected to bus 1

OpenIPSL.Examples.IEEE9.Generation_Groups.Gen1 OpenIPSL.Examples.IEEE9.Generation_Groups.Gen1

18kV/100MVA generation unit connected to bus 2

Information

18kV/100MVA Generation unit, identified as number 1, connected to bus 2, and composed of the following component models:

Note that the model allows for a disturbance to be introduced in the voltage reference value for the excitation system.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

NameDescription
vf0 
vref0 
Power flow data
S_bSystem base power [V.A]
V_bBase voltage of the bus [V]
fnSystem frequency [Hz]
P_0Initial active power [W]
Q_0Initial reactive power [var]
v_0Initial voltage magnitude [1]
angle_0Initial voltage angle [rad]
displayPFDisplay power flow:
AVR Disturbance
height_1 
tstart_1 
refdisturb_1 
Parameter mask
enableS_bEnable S_b in parameter list
enableV_bEnable V_b in parameter list
enablefnEnable fn in parameter list
enableP_0Enable P_0 in parameter list
enableQ_0Enable Q_0 in parameter list
enablev_0Enable v_0 in parameter list
enableangle_0Enable angle_0 in parameter list
enabledisplayPFEnable displayPF in parameter list

Connectors

NameDescription
pwPin 

OpenIPSL.Examples.IEEE9.Generation_Groups.Gen2 OpenIPSL.Examples.IEEE9.Generation_Groups.Gen2

13.8kV/100MVA generation unit connected to bus 3

Information

13.8kV/100MVA Generation unit, identified as number 2, connected to bus 3, and composed of the following component models:

Note that the model allows for a disturbance to be introduced in the voltage reference value for the excitation system.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

NameDescription
vf0 
vref0 
Power flow data
S_bSystem base power [V.A]
V_bBase voltage of the bus [V]
fnSystem frequency [Hz]
P_0Initial active power [W]
Q_0Initial reactive power [var]
v_0Initial voltage magnitude [1]
angle_0Initial voltage angle [rad]
displayPFDisplay power flow:
AVR Disturbance
height_2 
tstart_2 
refdisturb_2 
Parameter mask
enableS_bEnable S_b in parameter list
enableV_bEnable V_b in parameter list
enablefnEnable fn in parameter list
enableP_0Enable P_0 in parameter list
enableQ_0Enable Q_0 in parameter list
enablev_0Enable v_0 in parameter list
enableangle_0Enable angle_0 in parameter list
enabledisplayPFEnable displayPF in parameter list

Connectors

NameDescription
pwPin 

OpenIPSL.Examples.IEEE9.Generation_Groups.Gen3 OpenIPSL.Examples.IEEE9.Generation_Groups.Gen3

16.5kV/100MVA generation unit connected to bus 1

Information

16.5kV/100MVA Generation unit, identified as number 3, connected to bus 1, and composed of the following component models:

Note that the model allows for a disturbance to be introduced in the voltage reference value for the excitation system.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

NameDescription
vf0 
vref0 
Power flow data
S_bSystem base power [V.A]
V_bBase voltage of the bus [V]
fnSystem frequency [Hz]
P_0Initial active power [W]
Q_0Initial reactive power [var]
v_0Initial voltage magnitude [1]
angle_0Initial voltage angle [rad]
displayPFDisplay power flow:
AVR Disturbance
height_3 
tstart_3 
refdisturb_3 
Parameter mask
enableS_bEnable S_b in parameter list
enableV_bEnable V_b in parameter list
enablefnEnable fn in parameter list
enableP_0Enable P_0 in parameter list
enableQ_0Enable Q_0 in parameter list
enablev_0Enable v_0 in parameter list
enableangle_0Enable angle_0 in parameter list
enabledisplayPFEnable displayPF in parameter list

Connectors

NameDescription
pwPin 
Automatically generated Mon Oct 10 14:35:39 2022.