Gen1
Gen2
Gen3
Package with a set of generation units that is used in Example 3 system
This package contains basically three generation units:
Each generation unit allows the user to perform a step disturbance in the voltage reference value for each Automatic Voltage Regulator.
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
| Gen1
|
100MVA/18kV generation unit for bus 1 |
| Gen2
|
100MVA/13.8kV generation unit for bus 2 |
| Gen3
|
100MVA/16.5kV generation unit for bus 3 |
OpenIPSL.Examples.Tutorial.Example_3.Generation_Groups.Gen1100MVA/18kV generation unit for bus 1
Note that this 100MVA/18kV generation unit allows the user to perform a step disturbance of magnitude height at instant tstart in the voltage reference value for each Automatic Voltage Regulator.
Also note that boolean variable refdisturb needs to be set to true for disturbance to take place.
Extends from OpenIPSL.Interfaces.Generator (Interface for a generator which provides the PwPin).
| Name | Description |
|---|---|
| vf0 | Initial field voltage value |
| vref0 | Initial terminal voltage reference value |
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| AVR Disturbance | |
| height | Disturbance magnitude |
| tstart | Disturbance time instant |
| refdisturb | Allow disturbance |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.Tutorial.Example_3.Generation_Groups.Gen2100MVA/13.8kV generation unit for bus 2
Note that this 100MVA/13.8kV generation unit allows the user to perform a step disturbance of magnitude height at instant tstart in the voltage reference value for each Automatic Voltage Regulator.
Also note that boolean variable refdisturb needs to be set to true for disturbance to take place.
Extends from Gen1 (100MVA/18kV generation unit for bus 1).
| Name | Description |
|---|---|
| vf0 | Initial field voltage value |
| vref0 | Initial terminal voltage reference value |
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| AVR Disturbance | |
| height | Disturbance magnitude |
| tstart | Disturbance time instant |
| refdisturb | Allow disturbance |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.Tutorial.Example_3.Generation_Groups.Gen3100MVA/16.5kV generation unit for bus 3
Note that this 100MVA/16.5kV generation unit allows the user to perform a step disturbance of magnitude height at instant tstart in the voltage reference value for each Automatic Voltage Regulator.
Also note that boolean variable refdisturb needs to be set to true for disturbance to take place.
Extends from Gen1 (100MVA/18kV generation unit for bus 1).
| Name | Description |
|---|---|
| vf0 | Initial field voltage value |
| vref0 | Initial terminal voltage reference value |
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| AVR Disturbance | |
| height | Disturbance magnitude |
| tstart | Disturbance time instant |
| refdisturb | Allow disturbance |
| Name | Description |
|---|---|
| pwPin |