G1
G2
G3
G4
Set of generation units modeled with PSSE composed machines and AVR
This package contains four generation unit models composed of PSSE machine and AVR models, that are used in the Two_Areas_PSSE_AVR system.
| Name | Description |
|---|---|
| G1
|
900MVA generation unit, composed of machine and exciter, connected to bus 1 |
| G2
|
900MVA generation unit, composed of machine and exciter, connected to bus 2 |
| G3
|
900MVA generation unit, composed of machine and exciter, connected to bus 3 |
| G4
|
900MVA generation unit, composed of machine and exciter, connected to bus 4 |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.AVR.G1900MVA generation unit, composed of machine and exciter, connected to bus 1
900MVA generation unit connected to bus 1, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.AVR.G2900MVA generation unit, composed of machine and exciter, connected to bus 2
900MVA generation unit connected to bus 2, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.AVR.G3900MVA generation unit, composed of machine and exciter, connected to bus 3
900MVA generation unit connected to bus 3, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |
OpenIPSL.Examples.TwoAreas.Groups.PSSE.AVR.G4900MVA generation unit, composed of machine and exciter, connected to bus 4
900MVA generation unit connected to bus 4, and composed of the following component models:
Extends from TwoAreas.Support.Generator (Template icon for generation units used in this example).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| pwPin |