BaseWTDT
Base classes for renewable energy drive train models from PSSE
This package contains the base class for wind turbine drive train model (WTDTA1).
Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).
| Name | Description |
|---|---|
| BaseWTDT
|
Base class for the drive train of the WECC generic renewable models |
OpenIPSL.Electrical.Renewables.PSSE.WindDriveTrain.BaseClasses.BaseWTDTBase class for the drive train of the WECC generic renewable models
The BaseWTDT model is the base class that is extended to create the WTDTA1 component.
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| W0 | [1] |
| Power flow data | |
| S_b | System base power [V.A] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| Pm | Mechanical Power |
| Pe | Electrical Power |
| wt | Rotational Speed Deviation Turbine Blade |
| wg | Rotational Speed Deviation Generator |
| W_0 | |
| P0 |