baseMachine
Base classes for PSAT machines
Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).
| Name | Description |
|---|---|
| baseMachine
|
Base machine for PSAT models |
OpenIPSL.Electrical.Machines.PSAT.BaseClasses.baseMachineBase machine for PSAT models
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
| Name | Description |
|---|---|
| Power flow data | |
| S_b | System base power [VA] |
| V_b | Base voltage of the bus [V] |
| fn | System frequency [Hz] |
| P_0 | Initial active power [W] |
| Q_0 | Initial reactive power [var] |
| v_0 | Initial voltage magnitude [1] |
| angle_0 | Initial voltage angle [rad] |
| displayPF | Display power flow: |
| Machine parameters | |
| Sn | Power rating [VA] |
| Vn | Voltage rating [V] |
| ra | Armature resistance [1] |
| x1d | d-axis transient reactance [1] |
| M | Mechanical starting time, 2H [Ws/VA] [s] |
| D | Damping coefficient |
| Parameter mask | |
| enableS_b | Enable S_b in parameter list |
| enableV_b | Enable V_b in parameter list |
| enablefn | Enable fn in parameter list |
| enableP_0 | Enable P_0 in parameter list |
| enableQ_0 | Enable Q_0 in parameter list |
| enablev_0 | Enable v_0 in parameter list |
| enableangle_0 | Enable angle_0 in parameter list |
| enabledisplayPF | Enable displayPF in parameter list |
| Name | Description |
|---|---|
| p | |
| delta | Rotor angle [rad] |
| w | Rotor speed [pu] |
| v | Generator terminal voltage [pu] |
| P | Active power [pu] |
| Q | Reactive power [pu] |
| vf | Field voltage [pu] |
| vf0 | Initial field voltage [pu] |
| pm0 | Initial mechanical power [pu] |
| pm | Mechanical power [pu] |