OpenIPSL.Examples.IEEE14.Generation

OpenIPSL.Examples.IEEE14.Generation_Groups

Set of generation unit models used in IEEE 14-bus system

Information

This package contains five generation unit models, composed of machine and exciter models, that are used in the IEEE 14-bus system. These models are:

GroupBus1: generation unit connected to bus 1.
GroupBus2: generation unit connected to bus 2.
GroupBus3: reactive power generation unit connected to bus 3.
GroupBus6: reactive power generation unit connected to bus 6.
GroupBus8: reactive power generation unit connected to bus 8.

Package Content

Name	Description
GroupBus1	69kV/615MVA generation unit connected to bus 1
GroupBus2	69kV/60MVA generation unit connected to bus 2
GroupBus3	69kV/60MVA reactive power generation unit (synchronous condenser) connected to bus 3
GroupBus6	13.8kV/25MVA reactive power generation unit (synchronous condenser) connected to bus 6
GroupBus8	18kV/25MVA reactive power generation unit (synchronous condenser) connected to bus 8

OpenIPSL.Examples.IEEE14.Generation_Groups.GroupBus1

69kV/615MVA generation unit connected to bus 1

Information

69kV/615MVA Generation unit connected to bus 1, and composed of the following component models:

Machine: 5th order type 2, from PSAT.
Exciter: type II, from PSAT.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

Name	Description
vf0	Initial field voltage
vref0	Reference voltage AVR
Power flow data
S_b	System base power [V.A]
V_b	Base voltage of the bus [V]
fn	System frequency [Hz]
P_0	Initial active power [W]
Q_0	Initial reactive power [var]
v_0	Initial voltage magnitude [1]
angle_0	Initial voltage angle [rad]
displayPF	Display power flow:
Parameter mask
enableS_b	Enable S_b in parameter list
enableV_b	Enable V_b in parameter list
enablefn	Enable fn in parameter list
enableP_0	Enable P_0 in parameter list
enableQ_0	Enable Q_0 in parameter list
enablev_0	Enable v_0 in parameter list
enableangle_0	Enable angle_0 in parameter list
enabledisplayPF	Enable displayPF in parameter list

Connectors

Name	Description
pwPin

OpenIPSL.Examples.IEEE14.Generation_Groups.GroupBus2

69kV/60MVA generation unit connected to bus 2

Information

69kV/60MVA Generation unit connected to bus 2, and composed of the following component models:

Machine: 6th order, from PSAT.
Exciter: type II, from PSAT.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

Name	Description
vf0	Initial field voltage
vref0	Reference voltage AVR
Power flow data
S_b	System base power [V.A]
V_b	Base voltage of the bus [V]
fn	System frequency [Hz]
P_0	Initial active power [W]
Q_0	Initial reactive power [var]
v_0	Initial voltage magnitude [1]
angle_0	Initial voltage angle [rad]
displayPF	Display power flow:
Parameter mask
enableS_b	Enable S_b in parameter list
enableV_b	Enable V_b in parameter list
enablefn	Enable fn in parameter list
enableP_0	Enable P_0 in parameter list
enableQ_0	Enable Q_0 in parameter list
enablev_0	Enable v_0 in parameter list
enableangle_0	Enable angle_0 in parameter list
enabledisplayPF	Enable displayPF in parameter list

Connectors

Name	Description
pwPin

OpenIPSL.Examples.IEEE14.Generation_Groups.GroupBus3

69kV/60MVA reactive power generation unit (synchronous condenser) connected to bus 3

Information

69kV/60MVA Reactive power generation unit (synchronous condenser) connected to bus 3, and composed of the following component models:

Machine: 6th order, from PSAT.
Exciter: type II, from PSAT.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

Name	Description
vf0	Initial field voltage
vref0	Reference voltage AVR
Power flow data
S_b	System base power [V.A]
V_b	Base voltage of the bus [V]
fn	System frequency [Hz]
P_0	Initial active power [W]
Q_0	Initial reactive power [var]
v_0	Initial voltage magnitude [1]
angle_0	Initial voltage angle [rad]
displayPF	Display power flow:
Parameter mask
enableS_b	Enable S_b in parameter list
enableV_b	Enable V_b in parameter list
enablefn	Enable fn in parameter list
enableP_0	Enable P_0 in parameter list
enableQ_0	Enable Q_0 in parameter list
enablev_0	Enable v_0 in parameter list
enableangle_0	Enable angle_0 in parameter list
enabledisplayPF	Enable displayPF in parameter list

Connectors

Name	Description
pwPin

OpenIPSL.Examples.IEEE14.Generation_Groups.GroupBus6

13.8kV/25MVA reactive power generation unit (synchronous condenser) connected to bus 6

Information

13.8kV/25MVA Reactive power generation unit (synchronous condenser) connected to bus 6, and composed of the following component models:

Machine: 6th order, from PSAT.
Exciter: type II, from PSAT.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

Name	Description
vf0	Initial field voltage
vref0	Reference voltage AVR
Power flow data
S_b	System base power [V.A]
V_b	Base voltage of the bus [V]
fn	System frequency [Hz]
P_0	Initial active power [W]
Q_0	Initial reactive power [var]
v_0	Initial voltage magnitude [1]
angle_0	Initial voltage angle [rad]
displayPF	Display power flow:
Parameter mask
enableS_b	Enable S_b in parameter list
enableV_b	Enable V_b in parameter list
enablefn	Enable fn in parameter list
enableP_0	Enable P_0 in parameter list
enableQ_0	Enable Q_0 in parameter list
enablev_0	Enable v_0 in parameter list
enableangle_0	Enable angle_0 in parameter list
enabledisplayPF	Enable displayPF in parameter list

Connectors

Name	Description
pwPin

OpenIPSL.Examples.IEEE14.Generation_Groups.GroupBus8

18kV/25MVA reactive power generation unit (synchronous condenser) connected to bus 8

Information

18kV/25MVA Reactive power generation unit (synchronous condenser) connected to bus 8, and composed of the following component models:

Machine: 6th order, from PSAT.
Exciter: type II, from PSAT.

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Parameters

Name	Description
vf0	Initial field voltage
vref0	Reference voltage AVR
Power flow data
S_b	System base power [V.A]
V_b	Base voltage of the bus [V]
fn	System frequency [Hz]
P_0	Initial active power [W]
Q_0	Initial reactive power [var]
v_0	Initial voltage magnitude [1]
angle_0	Initial voltage angle [rad]
displayPF	Display power flow:
Parameter mask
enableS_b	Enable S_b in parameter list
enableV_b	Enable V_b in parameter list
enablefn	Enable fn in parameter list
enableP_0	Enable P_0 in parameter list
enableQ_0	Enable Q_0 in parameter list
enablev_0	Enable v_0 in parameter list
enableangle_0	Enable angle_0 in parameter list
enabledisplayPF	Enable displayPF in parameter list

Connectors

Name	Description
pwPin

Automatically generated Mon Oct 10 14:35:39 2022.